This product is imported. Country of origin may vary.
Usually Ships 1-2 Business Days
Product Description
DuPont™ Tyvek® 400 Hooded Coverall. Robust protection against fine particles and light liquid splash in a breathable, lightweight garment. White coverall features a respirator fit hood, comfort fit design, elastic wrists, ankles, and waist, a storm flap, serged seams, and a pin lock slider zipper pull. Suitable for a variety of applications, including maintenance, remediation, spray painting, and general clean-up. (25 Per Case)
Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.
Pin locking slider locks in place when the pins on the puller are pushed into the zipper elements
Tested and classified as Type 5 and Type 6 chemical protective clothing in accordance with ISO 16602
Stormflaps.
Elastic opening for tighter fit at wrist
Attached respirator-fit hood with elastic around face opening, designed to cover neck and chin and fit around respirator face mask
Longer zipper extends to chin for complete coverage of neck area
Elastic opening for tighter fit at ankle
Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.
Manufactured under specifications that do not contain natural rubber latex
Thickness ASTM D1777 5.9 mils
Basis Weight ASTM D3776 1.2 oz/yd2
Burst Strength - Mullen ASTM D774 50 psi
Seam Strength ASTM D1683 > 19 lbf
Breaking Strength - Grab (MD) ASTM D5034 18 lbf/in
Breaking Strength - Grab (CD) ASTM D5034 22 lbf/in
Hydrostatic Head AATCC 127 45 inches H2O
Surface Resistivity (23°C / 25% RH). EN 1149-1 <2.5 x 10^9 ohms
Wearing Apparel Flammability 16 CFR 1610 Help Class 1
Specifications
Safety Notice
Warning! This product may cause cancer and/or reproductive harm. https://www.p65warnings.ca.gov
Important Safety Information
We work hard to offer the best selection of top-quality safety, rigging, hardware, and cargo control products to our customers. However, when used improperly, serious injury and/or death may occur. The products we sell are intended to be used only by trained professionals in accordance to industry standards, OSHA regulations, as well as State and Federal law.
All products, including/but not limited to cargo control, rigging, and safety equipment should be inspected before each use to ensure they are in proper working order. Any product that is damaged, cut, worn, faded, etc. must NOT be used and must be replaced. Repairing damaged or worn cargo control, rigging, and/or safety products is UNLAWFUL and must NEVER be performed under any circumstance.
Harriscos - Industrial Outfitters assumes no liability resulting from improper selection or misuse of any product we sell.
Reviews
There are no reviews for this product.